Above Ground Grease Interceptors | SS-AGI Stainless Steel
The SS-AGI range are the ideal solution on sites where large below ground interceptors are required, but underground groundwork access is difficult.
The SS AGI interceptors can be installed above ground where gravity is attainable or with the use of pumps where gravity is not.
SS-AGI tanks are manufactured from 304-grade stainless steel and built to BS1825 standards with internal twin grease baffles and a mid-centre sludge baffle.
Each unit has a 110mm inlet & outlet connector, a set of adjustable M16 levelling feet & 2 or 3 piece neoprene sealed clip down covers. Bespoke models are also available by request ranging from 450 to 20,000 litres. Powder-coated legs can also be fabricated & supplied for tanks that require lifting to meet with existing pipework levels.
Benefits
- 10 Year Warranty
- Rust Free Stainless Steel
- Odour Tight Neoprene Seal
- Above Ground
- Simple to Install
- Adjustable Levelling Feet
- Air Tight Neoprene Seal:
Fully Sealed To Lock In Odours - Complies with:
BS EN 1825-1:2004 UK Building Regs - Designed in accordance with:
BS EN 1825-2:2002
Maintenance
We recommend regular inspection and the emptying of the interceptor at least once every three months by a licensed waste management company. It s important interceptors are serviced on a regular basis. Otherwise they will become less efficient at trapping fats, oils and greases (FOGs) with the more FOGs it traps. Once its liquid volume is more than 25% FOGs the interceptor should be emptied.
SS-AGI Grease Interceptor Products
SS-AGI 450
Grease Interceptor
| Application: | Hotel / Food Processing |
| Material: | 304 Grade Stainless Steel |
| Inlet: 110mm | Outlet: 110mm |
| Capacity: | 450 Litre |
| Installation: | Above Ground |
| Lid: | Three Piece |
| Feet: | M-16 Adjustable |
£1,500.00
SS-AGI 700
Grease Interceptor
| Application: | Hotel / Food Processing |
| Material: | 304 Grade Stainless Steel |
| Inlet: 110mm | Outlet: 110mm |
| Capacity: | 700 Litre |
| Installation: | Above Ground |
| Lid: | Three Piece |
| Feet: | M-16 Adjustable |
£1,850.00
SS-AGI 1000
Grease Interceptor
| Application: | Hotel / Food Processing |
| Material: | 304 Grade Stainless Steel |
| Inlet: 110mm | Outlet: 110mm |
| Capacity: | 1000 Litre |
| Installation: | Above Ground |
| Lid: | Four Piece |
| Feet: | M-16 Adjustable |
£2,450.00
Sizing and Dimensions
The size / flow rates are the most important factor when choosing your grease trap.
The adjacent chart is an excellent guide to what size you may need.
Alternatively, if you are unsure contact one of our staff on 01325 460040.
