Grease Traps, Grease Interceptors, Fatstrippa, Jumbo and Enzyme Dosing  
Jumbo 150L & 300L Compact Underground Grease Traps
 
img1
img1
img1
img1
 

The Jumbo Compact Range

The Jumbo Compact grease trap range are a unique shape & design gives to exception performance & strength. Fully manufactured from high density polyethylene (HDPE) each units are supplied with 110 mm pipework & UK rated lockable pedestrian rated plastic manhole cover.
Pedestrian rated lockable cover
Low Maintenance
Extensions available
Durable & Robust
High Strength HDPE Plastic
Simple To Install
Unique One Piece Moulding
Affordable
Jumbo 150 Litre Compact Grease Trap
Application: Small/Med Sized Restaurants / Hotels
Capacity: 150 Litres
Cover: Lockable Heavy Duty Plastic UK rated
Inlet: 110mm Outlet: 110mm
Material: High Density Polyethylene
Dry Weight: 15 Kilo
Installation: Underground
Jumbo 150 Litre Compact Grease Trap
£255.00+vat
Click here to view the Spec Sheet
Jumbo 300 Litre Compact Grease Trap
Application: Med/Lrg Sized Restaurants / Hotels
Capacity: 300 Litres
Cover: Lockable Heavy Duty Plastic UK rated
Inlet: 110mm Outlet: 110mm
Material: High Density Polyethylene
Dry Weight: 35 Kilo
Installation: Underground
Jumbo 300 Litre Compact Grease Trap
£395.00+vat
Click here to view the Spec Sheet
Jumbo Riser HDPE Extension Riser
Application: Compatible with Jumbo Interceptors
Height: 220mm per riser Stackable
Material: High Density Polyethylene
£35.00+vat
Click here to view the Spec Sheet
 Environmental Technologies Limited
Call Grease Trap Sales
01325 460040
WorldPay Payments Processing
 
 
 
 

Jumbo Compact Installation Methods

 
Stage 1:
Lay a minimum 200mm base of concrete. During this stage case should be taken to ensure that the bottom of the unit is uniformly supported so that point loads to the base are avoided. Connect the incoming and outgoing pipe work preferably using standard UPVC couplings. Please ensure all the units are connected properly and have correct levels, ensure no negative falls are in the system before connection to inlet and outlet pipes.

Stage 2:
Ensure there is an adequate water supply available. It is recommended that the unit is at least half filled with water for ballast and to the unit floating, and then pour concrete around the sides of the tank with a minimum 100mm of concrete around the unit, making sure concrete is packed into the ribs. This will take you to just below the pipe work. Do not use vibrating pokers to consolidate the concrete.

Stage 3:
Should one of our extensions be fitted to accommodate extended invert. This should be backfilled with concrete as detailed above. Please note extensions can only be supplied to 1000mm in line with Building Regulation and Health and Safety. Deeper inverts should be accommodated by use of our access chambers risers (please ask for more details if you are unsure).

Stage 4:
It is important to check the unit has been filled (Primed) with reasonably clean water to the bottom invert or waterline of the
outlet pipe. This is the unit's normal water level when at rest. Check all pipe connections are clear from obstructions.

Please note: Jumbo Grease Interceptors should not be installed in trafficked situations and in accordance to
BSen1825 should ideally be installed in a compounded area with suitable free access for cleaning/maintenance.

 
Jumbo 300 Litre Compact Grease Trap
 
 
 
Website Designed by Digital85
Privacy Notice | Conditions of Use | About Payments
All Rights Reserved 2012 | www.polytraps.com
Fatstrippa / Clear Flow - Please visit our website