Grease Traps, Grease Interceptors, Fatstrippa, Jumbo and Enzyme Dosing  
High Density Polyethylene Underground Grease Traps

GT Underground Grease Traps

The Polytraps GT range of High Density Poly Ethylene (HDPE) grease traps are designed for below ground installation. They are supplied as standard with 110mm pipe work with sealed UK rated pedestrian galvanized steel covers.

Not only are they very effective & robust, these
light weight units are also very easy to install.
 
High Strength HDPE Plastic
Extensions available
Low Maintenance
Easy Installation
Pedestrian rated cover supplied
Durable & Robust
Polytraps GT GT1 150 Litre Grease Traps
Application: Small/Med Sized Restaurants / Pubs
Capacity: 150 Litres
Cover: Galvanized Steel Pedestrian UK Rated
Inlet: 110mm Outlet: 110mm
Material: High Density Polyethylene
Dry Weight: 15 Kilo
Installation: Underground
GT1 150 Litre Grease Traps
£265.00+vat
Click here to view the Spec Sheet
Polytraps GT GT2 300 Litre Grease Traps
Application: Med Sized Restaurants / Pubs / Hotels
Capacity: 300 Litres
Cover: Galvanized Steel Pedestrian UK Rated
Inlet: 110mm Outlet: 110mm
Material: High Density Polyethylene
Dry Weight: 30 Kilo
Installation: Underground
GT2 300 Litre Grease Traps
£385.00+vat
Click here to view the Spec Sheet
Polytraps GT GT3 450 Litre Grease Traps
Application: Large Sized Restaurants / Pubs / Hotels
Capacity: 450 Litres
Cover: Galvanized Steel Pedestrian UK Rated
Inlet: 110mm Outlet: 110mm
Material: High Density Polyethylene
Dry Weight: 45 Kilo
Installation: Underground
GT3 450 Litre Grease Traps
£415.00+vat
Click here to view the Spec Sheet
GT Riser HDPE Extension Riser
Application: Compatible with GT Grease Traps
Height: 220mm per riser Stackable
Material: High Density Polyethylene
HDPE Extension Riser
£35.00+vat
Click here to view the Spec Sheet
 Environmental Technologies Limited
Call Grease Trap Sales
01325 460040
WorldPay Payments Processing
 
 
GT Grease Traps - Sewage Treatment / Septic Tanks
 
The Polytrap GT range are ideal for pubs & restaurants on main drainage or operating their own sewage treatment / septic plants
 
 
Low Maintenance
As a guideline we would recommend regular inspection and emptying on a three monthly basis by your local licensed waste carrier.

For smaller pubs & cafes this may be increased to 6 monthly depending on usage..
 

GT Installation Methods - Below Ground

 

Stage 1: Lay a minimum 100mm base of concrete. During this stage case should be taken to ensure that the bottom of the unit is uniformly supported so that point loads to the base are avoided. Connect the incoming and outgoing pipe work preferably using standard UPVC couplings. Please ensure all the units are connected properly and have correct levels, ensure no negative falls are in the system before connection to inlet and outlet pipes.

Stage 2: Ensure there is an adequate water supply available. It is recommended that the unit is at least half filled with water for ballast and to the unit floating, and then pour concrete around the sides of the tank with a minimum 100mm of concrete around the unit, making sure concrete is packed into the ribs. This will take you to just below the pipe work. Do not use vibrating pokers to consolidate the concrete.

Stage 3: Should one of our extensions be fitted to accommodate extended invert. This should be backfilled with concrete as detailed above. Please note extensions can only be supplied to 1000mm in line with Building Regulation and Health and Safety. Deeper inverts should be accommodated by use of our Access Chambers (please ask for more details if you are unsure).

Stage 4: It is important to check the unit has been filled (Primed) with reasonably clean water to the bottom invert or waterline of the outlet pipe. This is the unit’s normal water level when at rest. Check all pipe connections are clear from obstructions.

  Please note: Grease Traps should not be installed in trafficked situations and in accordance to BSen1825 should ideally be installed in a compounded area with suitable free access for cleaning/maintenance.
 
 
Website Designed by Digital85
Privacy Notice | Conditions of Use | About Payments
All Rights Reserved 2012 | www.polytraps.com
Fatstrippa / Clear Flow - Please visit our website